A.For paper width up to 2700mm to make bathroom tissue, kitchen towels and industrial rolls up to 300mm
A、 diameter. Equipped with variable perforation length system to satisfy any length need. The speed of this
B、 rewinder is up to 325m/min, 6 cycles per minute, including:
★Two steel to rubber or steel to paper embosser units.
★Two or three backstands, with a double or three belt driving system, for jumbo rolls up to 1500mm diameter, and
C、 with a hydraulic loading of jumbo roll system.
B、This EDW200 Economical line will automatically change logs and unload the finished products, and automatically
D、 cut and seal the tails of the logs, leaving a lip about 20mm to make it easy for consumers to start using the rolls
E、 without tearing the paper at the seal.
C、All the driven system to be by means of timing belts, nylon belts and gears, for years of free maintenance.
F、 Electrical eyes will be mounted on the different parts of the line to monitor the machine and stop it in case it runs out
G、 of paper, cores or any other unforeseen problems. The lubrication systems will be provided on the major parts of the
H、 line.
D、The motor power is 7.5kW. Variable frequency control depending on the final specifications and requirements.
E、This line is to be controlled by a PLC of your choice.
Options：
★Glue Application system: This unit will apply a light amount of glue on the paper after embossing,to stick the two plies
I、 together for the kitchen towels.
★Edge embossing units: To hold the two ply together in bathroom tissue, especially in the industrial rolls to satisfy the
J、 consumers.
★A set of slitters : to slit the industrial rolls if this type of products are going to be made in this rewinder with the
K、 combination of bathroom tissue and kitchen towels.
◆One 5-meter conveyor to carry the rolls from the saw to the bagger, complete with
side and center rails to guide the rolls into the bagger.
One semi-automatic EDW-B-25 bagger
This bagger uses pre-made bags, up to 25 packages per minute depending on configurations.
It will automatically group the rolls and transfer them into the bags, on configuration of
L、 6, 8 10, 12 and 16 rolls per bag, on one layer or two layers, core by core or standing up type,
M、 with one automatic sealing machine to seal the packages coming out from the bagger. This bagger
N、 can be run only by one person.
EDW-LG90 Automatic Log Saw
90cuts/min(2 rolls at a time);Equipped with 610mm diameter blade,automatic sharpening system and 2sets of clamps,
O、 one for roll tissue and anther for kifchen towels.The infeed of the saw will receive the logs coming from the rewinder and
P、 cut to the length being required,including a discharge system to remove the trims .Automatic system to transfer the logs
Q、 from the rewinder to the saw.
EDW-200 SERIES ECONOMICAC LINE
A、 * Full automatic bathroom tissue, kitchen towels and industrial rolls rewinder
* Automatic injet the cores and unload the finished products and start a new cycls
B、 Parent roll width
C、 500mm-2700mm
D、 Parent roll diameter
E、 Up to Φ1500mm
F、 Core inside diameter of parent rol
G、 Φ3''(76mm)or as requested
by custom
H、 Machine speed
I、 0-32m/min depending on model
J、 Operating speed
K、 0-300m/min,6 cycles(logs)/min
L、 Finished roll outside diameter
M、 Bathroom tissu:Φ80-150mm
N、 Kitchen towels:Φ80-150mm
O、 Industrial rolls:Φ100-300mm
P、 Perforation pitch
Q、 Variable, any size needed
R、 Sheet count
S、 Increments of one sheef
T、 Core outside diameter of finished rolls
U、 Φ25-80mm
V、 Converting web
W、 1 or 2 ply, 15-30 gsm
X、 Installed power
Y、 7.5kw,15kw
Z、 OPTIONS
AA、 1.Two or three backstands
BB、 2.One or two embosser units, steel to steel, steel to rubber or steel to paper
CC、 3.Glue applicator unit to make kitchen towels
DD、 4.Slitters to make industrial jumbo rolls
EE、 5.Edge embossing units
FF、 6.One color printer
GG、 EDW-LG90 AUTOMATIC LOG SAW
HH、 Log length
II、 1500mm 2700mm
JJ、 Log outside diameter
KK、 Φ80-150mm
LL、 Cutting length
MM、 Servo drive for any cutting length
NN、 Machine speed
OO、 100v/min,2rolls/per cut
PP、 Operation speed
QQ、 90cuts/min,2rolls/per cut
RR、 Blade outside diameter
SS、 Φ610mm
TT、 Installed power
UU、 2AC motors:1×1HP,1×2HP
VV、 Vottage
WW、 As required by customer
Download this catalog in PDF file by clicking
|
|
|
|
|
